Here’s your H1:
A Simple Step by Step Guide on How to Activate Your eSIM Right Now
When you purchase a new phone and need mobile service instantly, you can skip the physical SIM card by scanning a QR code from your carrier. This process, known as eSIM activation, downloads your cellular plan directly to your device’s embedded chip. The benefit of instant connectivity allows you to switch networks or add a second line without waiting for a plastic card to arrive. Simply go to your phone’s cellular settings, select “Add eSIM,” and follow the on-screen prompts to complete the setup.
Understanding eSIM Technology and Compatibility
Activating an eSIM requires understanding that it is a rewritable chip soldered into your device, not a physical card. Compatibility is the first hurdle: your device must be eSIM-capable and carrier-unlocked, while your chosen network must support eSIM provisioning. To activate, you typically scan a QR code from your carrier or manually enter an activation code (SM-DP+ address). Key question: Will my phone work with any carrier’s eSIM? No; device and carrier profiles must align, often requiring the same IMEI/ICCID pairing during activation. Before starting, confirm your device’s IMEI is whitelisted for the specific carrier’s eSIM profile to avoid activation failures. The process itself is digital, with the profile downloading directly to the eSIM chip once the code is accepted.
What is an eSIM and how it differs from a physical SIM card
An eSIM is a tiny, embedded microchip soldered directly onto your device’s motherboard, functioning as a reprogrammable digital SIM. Unlike a physical SIM, which is a removable plastic card you must insert into a tray, an eSIM cannot be taken out. Activation requires downloading a carrier’s profile—usually via a QR code or app—rather than swapping cards between devices. This means you switch networks through software settings, not hardware changes. The key practical difference: physical SIMs offer tactile portability between phones, whereas an eSIM enables instant activation or plan changes without waiting for a card to arrive or locating a SIM ejector tool.
| Aspect | Physical SIM | eSIM |
|---|---|---|
| Form | Removable plastic card | Soldered chip in device |
| Activation | Insert card | Download profile via settings |
| Switching carriers | Replace card physically | Change profile in software |
| Device change | Move card to new phone | Re-download profile or transfer |
Checking if your smartphone or device supports eSIM functionality
Before diving into activation, you need to check eSIM device compatibility directly on your phone. Open your Settings menu, then tap “Cellular” or “Mobile Data.” If you see an option labeled “Add eSIM” or “Add Cellular Plan,” your device supports it. Alternatively, dial *#06#—a pop-up showing an EID number confirms eSIM readiness. For iPhones (XR and newer), Google Pixels (3a and later), and Samsung Galaxy S20 series onward, support is standard, but double-check your specific model via the manufacturer’s website.
Q: How can I quickly check if my phone supports eSIM without searching online?
A: Go to Settings > About Phone; if you spot an “EID” or “IMEI (eSIM)” entry, you’re good to go.
Identifying carrier and network provider eSIM support
To activate eSIM, first verify that your device is unlocked and then check carrier eSIM support directly via the provider’s official website, app, or support channels. Not all carriers offer eSIM, and some restrict it to specific plans or regions. Look for a dedicated eSIM activation portal or QR code delivery method.
- Access your device’s settings menu under “Cellular” or “Mobile Data” to see if “Add eSIM” is available, confirming hardware support.
- Check the carrier’s coverage map for eSIM compatibility, as some networks limit it to postpaid or prepaid tiers.
- Contact customer support to confirm eSIM provisioning eligible plans and any required device model verification.
Before You Start the eSIM Activation Process
Before you start the eSIM activation process, verify device and carrier compatibility first. Your handset must be unlocked and support eSIM profiles, specifically checking the settings menu for “Add Cellular Plan.” Ensure a stable Wi-Fi connection is available, as the initial download requires internet access. Have your unique QR code or activation details from your carrier ready—these are
non-transferable and expire after a single use or within a specific timeframe
. Do not remove your physical SIM until the eSIM profile is fully installed and active, to avoid losing service mid-process. Finally, disable any VPN temporarily, as it can interfere with the carrier’s server connection during activation.
Verifying your device is unlocked and eligible for eSIM
Before starting activation, confirm your phone is carrier-unlocked for eSIM. A locked device will reject the new eSIM profile. Check this in your settings under “Cellular” or “Mobile Data”; if a “Carrier Lock” section shows “No SIM restrictions,” you are eligible. You also need a device model that specifically supports eSIM—not all phones do. Contact your current carrier if you are unsure about your unlock status.
- Navigate to Settings > General > About and look for “Carrier Lock.”
- Verify your phone’s model number supports eSIM via the manufacturer’s support page.
- Ensure no outstanding payment or contract obligates the device to a specific carrier.
Securing a stable Wi-Fi or mobile data connection
Securing a stable Wi-Fi or mobile data connection is critical before initiating eSIM activation, as the process downloads a profile that requires uninterrupted internet access. A dropped connection can cause a failed download, potentially locking the eSIM slot and requiring carrier support. Use a private, password-protected Wi-Fi network rather than public hotspots to avoid throttling or interference. If relying on mobile data, ensure your current physical SIM has sufficient signal strength and an active data plan. Switch to airplane mode briefly to refresh network registrations, then re-enable data. This mitigates activation failure risks from intermittent connectivity.
Gathering your eSIM activation details from your carrier
Before diving into activation, gather your eSIM activation details from your carrier. This typically requires scanning a QR code for eSIM setup sent via email or available in your account portal. Follow this sequence:
- Log into your carrier’s website or app and locate the eSIM provisioning section.
- Select your device model to generate the correct QR code.
- Download or screenshot the code for offline access.
- Note any manual confirmation code provided, as some carriers require it during installation.
Double-check that the details match your specific phone before proceeding, as mismatched codes cause errors.
Activating eSIM via QR Code Scan
To activate your eSIM via QR code scan, begin by accessing your device’s mobile network settings, typically found under “Cellular” or “Connections.” Choose the option to add a mobile plan, then select “Scan QR code.” Point your camera at the physical QR code provided by your carrier in their confirmation email or on their website. The device will automatically parse the embedded activation profile. After scanning, tap “Continue” or “Activate” to install the profile. You may need to set this line as your default for data or calls. Once installed, your device connects to the network within seconds, making this one of the fastest methods to activate eSIM without needing a physical card. Ensure you have a stable Wi-Fi connection during the process for seamless download.
Locating the QR code from your carrier’s email or app
To activate your eSIM, first find the QR code your carrier sent. Check the email they used to confirm your new eSIM plan; the code is often attached as an image or embedded in a PDF labeled “eSIM Activation.” If you’re using your carrier’s app, log in and navigate to your account or device management section—look for a “Get QR Code” or “eSIM Details” button. This is your eSIM activation QR code, a unique square barcode you’ll scan with your phone’s camera. Save it to your photos or keep the email open for the next step.
Locating your eSIM QR code is simple: check the carrier’s email or app for the unique barcode needed to activate your eSIM.
Navigating to the cellular or mobile data settings menu
To begin eSIM activation via QR code, first access your device’s cellular data settings menu. On iOS, navigate to *Settings > Cellular > Add Cellular Plan*. On Android, the path is typically *Settings > Network & Internet > Mobile Network > Add Carrier*. This menu manages all network profiles, enabling addition of the eSIM. Verify you are in the correct section by looking for options like “SIMs” or “Mobile Plans.” Proceed only when the QR scan option is visible, as selecting the wrong menu may disrupt existing connections.
- Locate *Settings*, then select *Cellular* (iOS) or *Network & Internet* (Android).
- Tap “Add Cellular Plan” or “Mobile Network” to open the data settings menu.
- Ensure the menu displays a “Use QR Code” or “Scan QR” button for activation.
- Confirm no other menu is selected to avoid resetting current SIM preferences.
Scanning the QR code and confirming the installation
After scanning the QR code with your device’s camera, a prompt will appear to add the mobile data plan. You must then tap “Confirm” or “Install” to begin provisioning the eSIM profile. This step triggers the download and activation of the network credentials onto your device. For successful eSIM installation confirmation, ensure your device has a stable internet connection during this process.
- Do not navigate away from the confirmation screen until installation completes.
- If prompted, enter the activation code provided with your eSIM.
- Restart your device after confirming to finalize the connection.
Setting Up eSIM with a Carrier App
For many carriers, the most straightforward method for activating an eSIM is through their dedicated carrier app. After installing the app and logging into your account, you typically navigate to a section labeled “Manage Device” or “Add eSIM.” The app will then communicate directly with your phone’s hardware to install the eSIM profile over a secure connection, often without requiring a QR code. This process usually completes in under a minute once initiated.
A key advantage is that the carrier app handles the complex pairing between your account, the network, and your device automatically, removing the need to manually enter activation codes.
Downloading and opening your provider’s official app
To begin eSIM activation, go directly to your device’s official app store and search for your mobile carrier. Downloading and opening your provider’s official app is the only reliable method to start the process. Once installed, launch the app and log in using your account credentials. This app-based approach ensures you receive the correct eSIM profile instantly, avoiding manual QR code scans or store visits.
- Search for your carrier’s exact name to avoid third-party imposters.
- Use a stable Wi-Fi or mobile connection for a smooth download.
- Grant necessary permissions, like camera access for QR scanning if prompted later.
- If the app fails to open, restart your device and try again.
Logging into your account and selecting the eSIM option
Begin by opening your carrier’s app and entering your credentials to access your account. Once logged in, navigate the dashboard or account settings to locate the device management section, where you will find the eSIM activation option. Tap on this to view available plans, then select the one you want to add as an eSIM. Carefully confirm that your current device is listed before proceeding, as the option may default to a different line. The carrier app will then generate a QR code or initiate a direct download to your phone’s settings.
Logging into your carrier account and selecting the eSIM option is the gateway step that triggers the digital transfer of your plan to your device.
Following on-screen prompts to download and install the eSIM profile
Once the carrier app verifies your device eligibility, you must follow the on-screen prompts to complete the process. A typical sequence includes tapping “Download eSIM,” then confirming the plan details, such as your phone number. The prompt will ask you to initiate the eSIM profile installation, often requiring a tap on “Install” or “Continue.” Your device then downloads the profile, which may take a minute. Finally, a prompt confirms activation. If a QR code is involved, scanning it is part of this flow.
- Select “Download eSIM” or a similar activation trigger.
- Confirm the plan details on the prompt and tap “Install.”
- Wait for the download and installation to finish.
- Follow the final prompt to set the line as your primary or default number.
Manual eSIM Activation Without a QR Code
For manual eSIM activation without a QR code, you bypass the scanner by entering carrier-provided details directly into your phone’s cellular settings. In the activation menu, select “Enter Details Manually” and type the SM-DP+ address (the main server link), along with an activation code and a confirmation code you received from your provider. After submitting these, your device downloads and installs the eSIM profile instantly. This method is essential when you cannot scan a physical barcode—for example, if you ordered the plan online via email. Always double-check the codes; an incorrect digit prevents connection. Once the profile appears, label it clearly (e.g., “Work Data”) to manage multiple eSIM activation profiles easily.
Entering activation details manually in device settings
To enter activation details manually, navigate to the mobile network settings and select “Add eSIM” or “Add Cellular Plan.” Choose the option to enter details manually rather than scanning a code. You will input the SM-DP+ address and activation code provided by your carrier. This method requires precise entry, as any typographical error in the lengthy alphanumeric strings will fail to retrieve the eSIM profile. After confirming the details, the device contacts the carrier’s server to download and install the profile, making the manual SM-DP+ entry the critical step for QR-free activation.
Entering activation details manually involves typing the carrier-supplied SM-DP+ address and activation code into device settings to trigger eSIM profile download.
Using SM-DP+ address and activation code from your carrier
For manual eSIM activation without a QR code, you must input the SM-DP+ address and activation code provided by your carrier directly into your device’s cellular settings. The SM-DP+ address acts as the server endpoint that securely downloads the eSIM profile, while the activation code authenticates your subscription. This method is essential when a QR code is inaccessible or corrupted. Ensure the carrier supplies both fields in exact text format; any typo prevents profile installation. After entering the data, your device retrieves and installs the eSIM over a Wi-Fi or cellular connection.
- Obtain the SM-DP+ address and activation code from your carrier’s account portal or support team.
- Navigate to your device’s “Add Cellular Plan” menu and select China eSIM “Enter Details Manually.”
- Paste or type the server address and code precisely as given, avoiding spaces or line breaks.
- Confirm installation and label the plan (e.g., “Work” or “Travel”) for easy management.
Completing the profile download and applying it to your device
Once the eSIM profile download begins, ensure your device maintains a stable internet connection, typically via Wi-Fi. Do not interrupt the process; a progress indicator will show completion. After the download finishes, the device automatically applies the profile. You may need to confirm installation by tapping “Install” or entering a confirmation code. To finalize applying the eSIM profile, go to Settings > Cellular/Mobile, select the new line, and toggle it on. If prompted, reboot the device for proper activation. The profile label and network registration should appear within minutes.
Activating eSIM for Travel and International Use
To activate an eSIM for travel, first confirm your device is unlocked and purchase a compatible international data plan from a provider like Airalo or Holafly. After receiving the QR code or installation link via email, go to your phone’s cellular or mobile data settings, select “Add eSIM,” and scan the QR code. You may need to label the new line as “Travel” and set your primary home line as default for calls and SMS. For seamless connectivity, enable data roaming on the travel line upon arrival. A common question is: Do I need to remove my physical SIM? No, you can keep it installed but disable it in settings to avoid accidental roaming charges.
Purchasing a travel eSIM plan from a global provider
To purchase a travel eSIM plan from a global provider, first visit their website or app and select a destination package (e.g., regional or country-specific data). Choose a validity period and data allowance, then complete checkout. You will receive a QR code or activation code via email. Activate the travel eSIM by scanning the QR code in your device’s cellular settings or entering the code manually. Ensure you install the plan before departure, typically while connected to Wi-Fi, to avoid roaming charges.
- Check device compatibility (eSIM support and unlocked status) before purchasing
- Select a plan that matches your trip duration and expected data usage
- Keep the QR code or activation email accessible offline for installation later
Installing the eSIM while still at home or upon arrival
For maximum convenience, install your eSIM while still at home on a stable Wi-Fi connection, ensuring the profile downloads without data-roaming risks. This preloads the eSIM so it activates automatically upon arrival at your destination. If you prefer to wait, install upon arrival using airport Wi-Fi, but be aware that unexpected carrier charges may apply if your primary SIM is active. Always confirm your device is unlocked before you leave.
- Scan the QR code or enter the activation code exactly as provided by your provider.
- Label the new line clearly (e.g., “Travel Data”) to avoid confusion with your home line.
- Test that the eSIM profile appears in your cellular settings before departing.
Switching between primary and travel eSIM lines for data use
Switching between your primary and travel eSIM lines for data is straightforward once both profiles are installed. In your phone’s cellular settings, you’ll see each line listed; simply tap the travel eSIM and choose it for cellular data to route all internet traffic through your local trip plan. Your primary number can stay active for calls and texts on its own line, or you can turn it off to avoid roaming charges. On iOS, enable “Allow Cellular Data Switching” so your phone automatically uses the travel line’s data, with the primary line as a fallback if signal drops.
| Setting | Primary eSIM | Travel eSIM |
|---|---|---|
| Default data line | Off while abroad | On for all data |
| Calls & texts | Active (if roaming enabled) | Usually inactive |
Activating eSIM on Different Operating Systems
To activate eSIM on different operating systems, the core process is similar but access points vary. On an iPhone, head to Settings, tap Cellular, then “Add Cellular Plan.” You’ll scan a QR code or enter details manually. For Android (like Samsung or Pixel), go to Settings, then Connections or Network & Internet, and select “Add Mobile Plan.” Scanning the QR code from your carrier is the usual method. On a Windows laptop, navigate to Settings, Network & Internet, choose Cellular, and click “Add eSIM.” You might need to download the carrier’s app or enter an activation code. Regardless of device, ensure your phone is unlocked and connected to Wi-Fi before you begin how to activate eSIM steps. Each OS guides you with on-screen prompts, so just follow the instructions after scanning.
Enabling eSIM on iPhone (iOS settings and steps)
To enable eSIM on an iPhone, navigate to Settings > Cellular and tap “Add Cellular Plan.” Scan the QR code provided by your carrier or enter the details manually. If no QR code appears, tap “Enter Details Manually” and input the SM-DP+ address and activation code. For carriers supporting Quick Transfer, you can convert a physical SIM to eSIM directly from this menu. After adding the plan, assign it as your primary or secondary line under “Default Voice Line.” Finally, ensure the new eSIM is toggled on for your preferred cellular data usage.
Configuring eSIM on Android smartphones (Google Pixel, Samsung, OnePlus)
Configuring eSIM on Android smartphones like Google Pixel, Samsung, and OnePlus is straightforward. On a Pixel, head to Settings > Network & internet > SIMs > Add eSIM, then scan the QR code from your carrier. Samsung users navigate to Settings > Connections > SIM card manager > Add eSIM and follow the same scan process. For OnePlus, go to Settings > Wi-Fi & network > SIM & network > Add eSIM. All three support quick activation via QR code or manual entry. Profile switching is handled in the SIM settings menu, allowing easy swapping between physical and eSIM lines.
Q: Do I need a specific carrier to configure eSIM on a Pixel, Samsung, or OnePlus?
A: Not necessarily; most major carriers support eSIM activation on these devices, but verify your plan includes eSIM provisioning before starting.
Setting up eSIM on iPads, smartwatches, and Windows laptops
For iPads, navigate to Settings > Cellular > Add Cellular Plan to scan your carrier’s QR code or choose from a list. On a smartwatch, open the companion watch app on your paired iPhone—typically under the Cellular tab—to initiate the setup and associate a plan from your mobile account. Windows laptops require opening Settings > Network & internet > Cellular > Manage eSIM profiles, then selecting “Add eSIM profile” to enter the activation code or scan a QR. Each device demands a direct carrier link, but the process is streamlined for instant connectivity. Managing cellular plans on iPads, smartwatches, and Windows laptops simplifies mobile data access across your ecosystem.
Managing Dual SIM with eSIM and Physical SIM
After activating your eSIM, managing dual SIM with eSIM and physical SIM is straightforward. In your phone’s settings, assign your primary line for calls and data—often the physical SIM—while your secondary eSIM handles travel or work numbers. To switch data between them, simply toggle the preferred line without removing the physical card. For activation, ensure your eSIM profile is downloaded first; then label each SIM (e.g., “Personal” and “Business”) to avoid confusion. This setup lets you seamlessly jump between networks, maximizing coverage and cost control with zero hassle. Master this dual SIM management to keep both lines active and organized from day one.
Assigning labels like Primary, Secondary, or Data to each line
After activating your eSIM, assigning distinct labels like Primary, Secondary, or Data to each line is essential for clarity. In your phone’s SIM manager, you can rename the physical SIM “Primary” for calls and texts, and the eSIM “Data” for cellular internet, or vice versa. This step prevents confusion during dialing or hotspot use, ensuring the correct line handles specific tasks. Confidently set these labels immediately after activation to avoid accidental charges from the wrong plan.
Assigning Primary, Secondary, or Data labels gives each line a fixed role, eliminating guesswork in daily phone use.
Choosing default line for voice calls, messages, and mobile data
Once your eSIM is active, head into your phone’s Cellular settings to choose your default line for voice calls, messages, and mobile data. This is where you decide which number—your eSIM or your physical SIM—handles daily tasks. You can set one SIM for calls and another for data, like using your eSIM for fast 5G and the physical SIM for backup texts. The process is simple: pick a primary line for voice and messages, then select your data source separately. This keeps your communication organized without juggling settings manually.
| Feature | Primary eSIM | Primary Physical SIM |
|---|---|---|
| Calls & Messages | Use eSIM number | Use physical SIM number |
| Mobile Data | Data from eSIM plan | Data from physical SIM plan |
Toggling between lines and enabling data switching as needed
After activation, toggling between lines and enabling data switching as needed requires precise control in your device’s SIM manager. To switch active data, first designate one line as the primary data source, then toggle the other line’s cellular data toggle off or set it to secondary. For automatic data switching (where the phone shifts data to the other SIM if the primary line loses signal), ensure the “Allow Data Switching” option is enabled in the dual SIM settings. This feature works best when both lines support the same network bands, as otherwise handoff may stall. The sequence is:
- Open Settings → Cellular/Mobile Data
- Select the active eSIM or physical SIM as default data line
- Enable “Switch Mobile Data” or “Data Switching” for automatic fallback
- Manually toggle data between lines via the Control Panel for instant changes
Troubleshooting Common eSIM Activation Issues
When activating an eSIM, the most common issue is a network connection failure during download. Ensure your device has a stable Wi-Fi connection, as cellular data may not function before activation. If the eSIM profile fails to install, force a restart and navigate to your device’s cellular settings to manually add the eSIM using the provided activation or SM-DP+ address. Another frequent hurdle is a QR code scann rejecting due to poor lighting or smudged camera lens. If scanning fails, use the carrier’s manual entry method. Finally, always confirm your device is carrier-unlocked and compatible with the specific eSIM plan—check for software updates to ensure full support.
Dealing with slow or failed profile downloads
If your eSIM profile download is crawling or fails entirely, start by checking your Wi-Fi or cellular data connection—a weak signal is the most common culprit. Try switching from Wi-Fi to mobile data, or vice versa, to bypass a congested network. Restarting your device can clear temporary glitches. If the download times out, ensure your device’s software is up to date, as outdated versions often cause compatibility hiccups. For a persistently stalled profile download, delete the partially downloaded profile from your settings and request a new QR code or activation code from your carrier. Avoid retrying more than three times without a fresh code, as repeated attempts can lock the process.
| Slow Download | Failed Download |
| Switch networks, close background apps | Restart device, re-request activation code |
| Check signal strength bars | Update OS to latest version |
| Wait 1–2 minutes before retrying | Delete failed profile first, then retry |
Resolving incompatibility errors or unsupported device messages
Seeing an “unsupported device” error? This usually means your phone isn’t eSIM compatible for that specific carrier. First, check your device’s IMEI on the carrier’s official compatibility page—do not rely on manufacturer specs alone. If the phone was purchased from a different region, it may have locked network bands. Sometimes simply updating your phone’s carrier settings or iOS/Android version can clear the error. Also, confirm that no physical SIM is blocking the eSIM slot. If the error persists, ask the carrier to re-send the QR code or activation profile.
Resolve incompatibility errors by verifying IMEI, updating device software, and requesting a fresh activation profile from your carrier.
Contacting carrier support when activation codes don’t work
When activation codes fail, direct contact with the carrier is the only reliable next step. Avoid repeated entry attempts, as this may lock the eSIM profile. Instead, provide the carrier’s support team with the exact error message and the activation code (QR or manual string) you attempted. They can verify if the code was correctly generated for your device’s IMEI or if it has expired. A critical part of contacting carrier support when activation codes don’t work is requesting a fresh, verifiable eSIM profile pushed to your device remotely, rather than troubleshooting the old one. This bypasses underlying code corruption or backend mismatches efficiently.
Deleting or Transferring an eSIM to a New Phone
To transfer an eSIM to a new phone, first delete or deactivate the eSIM from your old device through its cellular settings to avoid authentication conflicts. Then, initiate the transfer by scanning a new QR code provided by your carrier or using their app to
activate the eSIM directly on the new phone without needing a physical SIM
. For supported carriers, you can often use a quick “eSIM Carrier Transfer” option during setup to move the profile automatically. Always ensure both devices are connected to Wi-Fi and that your carrier allows eSIM transfers without a fee—this streamlines activation and prevents service interruptions.
Removing an eSIM profile from your current device settings
Before activating an eSIM on a new phone, you must first remove the existing profile from your current device to free it for transfer. Navigate to your cellular or mobile data settings, locate the active eSIM, and select the option to delete or remove it. This instantly deactivates service on that handset, allowing the carrier’s network to recognize your new device. Without this step, the eSIM remains locked to the old phone, preventing successful activation elsewhere.
- Go to Settings > Cellular or Mobile Data, then tap the eSIM you want to remove.
- Choose “Remove Cellular Plan” or “Delete eSIM” to instantly sever the connection.
- Confirm the action—some carriers require you to scan a new QR code on the new phone.
- Keep the old phone powered off after removal to avoid network confusion during transfer.
Requesting a new QR code or activation code from your carrier
If you’ve deleted your eSIM before transferring it, or if the activation code expired, you must request a new QR code or activation code from your carrier. Log into your account on their website or app, locate your line’s eSIM management section, and select the option to reissue credentials. Some carriers provide a resend button for an SMS-based activation code, while others generate a fresh QR code immediately. Ensure you have a stable internet connection during this process, as the new code deactivates the old one. Save the replacement QR code as a screenshot or in your password manager for easy access during reinstallation.
In short: to activate a new eSIM after deletion, request a fresh QR code or activation code from your carrier’s online portal or support staff.
Reinstalling the eSIM on your new smartphone or gadget
Reinstalling the eSIM on your new smartphone or gadget begins by ensuring the old device no longer holds the profile. Access your carrier’s app or portal, select the eSIM to transfer, and generate a new QR code or activation token. On the new device, navigate to Settings > Cellular/Mobile Data > Add eSIM. Scan the provided QR code or manually enter the SM-DP+ address and activation code. For a seamless transition:
- Confirm the old device is powered off or has the eSIM deleted.
- On the new gadget, follow the on-screen prompts to install the profile.
- Restart the device to complete network registration.
No physical SIM swap is needed; the digital profile activates immediately upon successful installation.
